Product Sheet Sandview
Determine the detection of sand entry points downhole and sand production rates.
Downhole sand detection service
The innovative tool architecture of SandView™ downhole sand detection service integrates a new sensor design with signal processing and an interpretation algorithm to accurately detect the sand entry points downhole and determine sand production rates from different inflow zones under multichoke settings. The tool is a real-time measurement as opposed to a predictive or computational estimation.
The digital downhole detection and processing system provides enhanced sensitivity to even minute sand entries within a wellbore. The tool detects any grain of sand impacting the detector with sufficient energy. Although SandView service’s high-resolution acquisition can detect single particles as small as 0.1 mm in diameter, the measurement is immune to the typical challenges for sensing elements, such as background noise from tool motion, subsurface interference, and the impacts of fluid and gas jetting.
SandView | |
Vertical resolution | 1.5 ft [0.46 m] at 1,500 counts/s |
Sensitivity | Particle OD: 0.1 mm [70–140 mesh] |
Combinability | PS Platform production services platform; tractor conveyance |
The service detects sand production rates with greater accuracy. SandView service’s efficient interpretation algorithms discriminate particles by their size and energy, apply smart thresholds, conduct QC of the count and detection rates, and determine production rate confidence to provide answers not previously available with conventional measurements using filters or acoustic detection sensors at the surface. Sand counts can be transformed to volume and mass if the particle size and density are known.
Full combinability with PS Platform™ production services platform for either continuous or station logging introduces a fourth phase—sand—to multiphase production logging. Deployment of this compact tool is compatible with wireline and tractor conveyance.
SandView | |
Vertical resolution | 1.5 ft [0.46 m] at 1,500 counts/s |
Sensitivity | Particle OD: 0.1 mm [70–140 mesh] |
Combinability | PS Platform production services platform; tractor conveyance |
Specifications | |
---|---|
Measurement Specifications | |
Output | Sand counts/s |
Logging speed* | 900 ft/h [274 m/h]: 6-s exposure |
1,800 ft/h [549 m/h]: 3-s exposure | |
Vertical resolution | 1.5 ft [0.46 m] at 1,500 counts/s |
Sensitivity | Particle OD: 0.1 mm [70–140 mesh] |
Combinability | PS Platform production services platform; tractor conveyance |
Special applications | Sour service |
Mechanical Specifications | |
Temperature rating | 350 degF [177 degC] |
Pressure rating | 15,000 psi [103 MPa] |
Min. well size | 1.83 in [4.65 cm] |
Outside diameter | 1 11⁄16 in [42.8 mm] |
Length | 3.67 ft [1.12 m] |
Weight | 18.47 lbm [8.4 kg] |
Tension | 10,000 lbf [44,480 N] |
Compression | 1,000 lbf [4,448 N] |
All specifications are subject to change without notice.
* Dependent on required sensor exposure time.