Dissolvable frac plugs
Reduce plug-and-perf duration and associated scope 1 and 2 emissions from postfracturing cleanout operations
Energy consumption reduction
Reduce diesel consumption by more than 5,700 L per 50-stage well by eliminating coiled tubing milling
Emissions reduction
Reduce CO2e emissions by 31,000 kg by using 100 dissolvable plugs instead of 100 composite plugs
Track record
Reduce diesel usage and resulting emissions from coiled tubing operations during plug-and-perf completions
Conventional frac plugs require milling out before production can start. These milling runs are performed as part of well cleanout operations, typically with a coiled tubing (CT) unit. Daily diesel consumption for a CT milling operation ranges from 4,000 L to 6,000 L. The fuel is required for pumps, injector heads, water treatment, cranes, and other ancillary support. Each liter of diesel adds 2.712 kg of CO2e emissions to the atmosphere.
Our ReacXion fully dissolvable frac plugs, on the other hand, easily dissolve in the presence of common wellbore fluids after hydraulic fracturing is complete, considerably simplifying cleanout operations and reducing time to production. The time savings results in reduced diesel consumption and hence, lower CO2e emissions. Dissolution performance is tuned with the optimal material for freshwater or brine.
Immediate production
Fullbore production
Longer laterals
Decarbonize Your Operations
The family of ReacXion fully dissolvable frac plugs is part of our Transition Technologies™ portfolio of solutions that enable well and field development with decreased carbon impact. Learn about our collaborative approach and full field development solutions that sustainably drive high performance.
Read MoreThe content of this publication has not been approved by the United Nations and does not reflect the views of the United Nations or its officials or Member States.
