DRILPLEX
Mixed metal oxide water-based drilling fluid system
Screen easily, even at high flow rates, with unequaled solids suspension.
FLO-PLEX PLUS
Fluid loss control additive
FLO-PLEX PLUS additive is a polysaccharide derivative used to control filtration in the DRILPLEX AR PLUS system.
Traditional fluid-loss-control additives tend to destroy the elevated low-end rheology that makes mixed-metal oxide systems unique. FLO-PLEX PLUS additive was specifically developed to remedy this.
It is particularly suited for application in the DRILPLEX AR PLUS system that uses potassium salts for increased inhibition of formation clays and shales. FLO-PLEX PLUS additive will provide fluid loss control with minimal effect on rheology up to 275 degF [135 degC].
Advantages
- Tolerant to electrolytes
- Positive synergy with GELPLEX agent to stabilize the rheology of the DRILPLEX AR PLUS system
- Enhanced low-shear rheology when used with xanthan gum polymer
- Resistant to attack from bacteria
- Stable to 275 degF [135 degC] without thermal extension additives
- Effective in seawater fluids if hardness is treated out before the additive is introduced
| Typical Physical Properties | |
|---|---|
| Typical Physical Properties
Physical appearance |
Typical Physical Properties
White powder |
| Typical Physical Properties
Bulk density |
Typical Physical Properties
38 to 50 lb/ft3 [610 to 800 kg/m3] |
| Typical Physical Properties
pH |
Typical Physical Properties
10.5 to 11.5 |
| Typical Physical Properties
Solubility in water |
Typical Physical Properties
Dispersible |
Helpful links
About SLB