Latex-based fluid loss control sealant
POROSEAL Plus latex-based fluid loss control sealant is used to provide a chemical barrier that seals low-permeability, microfractured formations in shale gas plays and unconventional reservoirs. The sealant, in the presence of other bridging agents, can provide excellent bridging characteristics to water-based fluids. It also provides supplemental HPHT fluid loss control.
POROSEAL Plus sealant should be added at 5 to 15 lbm/bbl [14.27 to 42.8 kg/m3]. Pilot testing is recommended to determine any adverse effects on the system properties for all initial applications and large treatments. The performance of POROSEAL Plus sealant improves with salinity and can be used to improve both wellbore stability and fluid-loss performance of highly inhibitive water-based fluids.
This sealant is compatible with conventional water-based muds as well as high-performance fluids, such as
| Typical Physical Properties | |
| Physical appearance | White liquid |
| Odor | Mild |
| Specific gravity | 1.0–1.05 |
| pH | 5–8 (neat) |
| Boiling point | 212 degF [100 degC] |
| Melting or freezing point | 32 degF [0 degC] |
Bioassay information is available upon request. Handle as an industrial chemical, wearing protective equipment and observing the precautions described in the safety data sheet. Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin and eyes. Do not breathe spray mist or vapors. Avoid spills and splashing during use.
POROSEAL Plus sealant is packaged in 55-galUS [208-L] drums. Use specially constructed containers only. Ensure adequate ventilation. Keep airborne concentrations below exposure limits. Keep containers tightly closed in a dry, cool, and well-ventilated place.
