NeoSteer

At-bit steerable system

Overview

NeoSteer™ at-bit steerable systems are a new category of drilling systems that eliminate BHA reconfigurations between the curve and lateral sections. Part of our Transition Technologies™ portfolio of solutions, NeoSteer systems help minimize your well construction CO₂ footprint. These technologies reduce energy consumption and emissions, helping you reach your sustainability goals with improved efficiency, fewer trips, and less drilling time. NeoSteer at-bit steerable systems are aligned with United Nations Sustainable Development Goals 12 and 13.

UN SDGs

Aligns with United Nations Sustainable Development Goals 12 and 13.

Emissions reduction

Lower CO₂ emissions by drilling more sections in one run.

Products highlight

NeoSteer CL

Curve and lateral at-bit steerable system

NeoSteer CLx

Extreme curve and lateral at-bit steerable system

NeoSteer

At-bit steerable systems

NeoSteer at-bit steerable systems are capable of drilling both high-dogleg severity (DLS) curve sections and straighter, higher-quality lateral sections at high performance without the need to change the configuration between sections. This saves significant time and tool cost associated with tripping out and changing the BHA while lowering CO₂ emissions by drilling more sections in one run.

案例分享

At-Bit Innovation Boosts ROP 40% While Drilling Each of 12 Wells in One Run—Vertical Through Curve to Lateral, Colorado

NeoSteer at-bit steerable system with advanced cutting elements achieves ROP of 299 ft/h.

Feature.PageContent.Products.Portfolio

Feature.PageContent.Search.SelectedOptions

NeoSteer CL curve and lateral at-bit steerable system

High build rates, increased on-bottom drilling speed, and extended lateral lengths with the NeoSteer CL system

Drill both the curve and lateral sections in a faster single run with the NeoSteer CL system.

NeoSteer CLx system improves control and reaction time

Drill the curve and lateral in a single run and eliminate the need to change out the BHA for every section

The NeoSteer CLx system enables operators to drill extreme high-dogleg curves and laterals.

The content of this publication has not been approved by the United Nations and does not reflect the views of the United Nations or its officials or Member States.