HyperBlade Bit Raises Performance Standard in DJ Basin, Colorado | SLB
Home 资源库 HyperBlade Bit Raises Performance Standard in DJ Basin, Colorado

HyperBlade Bit Raises Performance Standard in DJ Basin, Colorado

已发表: 09/25/2018

Blue hero texture

Achieve higher ROP to TD

Colorado’s Denver-Julesburg (DJ) Basin is characterized as a soft formation with low abrasion levels. Typical well designs drill vertical, curve, and lateral sections in one run, using one bit and one BHA. The operator needed a bit design that would achieve higher ROP in the vertical, retain consistent steerability and build up in the curve, and have enough durability to drill 10,000 ft to 13,000 ft of the lateral section.

Use the HyperBlade bit to improve field drilling performance

Schlumberger recommended a BHA fitted with a HyperBlade bit. The bit incorporates a 3D cutting element from Schlumberger, the Hyper hyperbolic diamond cutting element. The Hyper element has a distinctive profile that cuts 20% deeper into soft and plastic formations and reduces cuttings size to minimize bit balling. In addition to substantial ROP increases, the element profile is proven to deliver better tracking and help the HyperBlade bit maintain steerability in curve and lateral sections.

The Hyper element features a distinctive hyperbolic profile that improves performance in soft and plastic formations.
The Hyper element features a distinctive hyperbolic profile that improves performance in soft and plastic formations.
The HyperBlade bit significantly increased ROP while setting a rig record for the field.
The HyperBlade bit significantly increased ROP while setting a rig record for the field.

Bit with distinctive hyperbolic profile delivers substantially improved results

The HyperBlade bit achieved an average ROP increase of 20% in three wells on two separate pads within the same field. One well experienced as much as a 50% improvement in ROP in the vertical, saving the operator 7.5 hours of drilling time versus offset wells using conventional bits. Additionally, this was the fastest well drilled to TD by a specific rig in the DJ Basin. The dull condition of each of the HyperBlade bits was superior to conventional bits from offset wells. Consequently, the HyperBlade bit has become the operator’s preferred cutting technology for the application.
The HyperBlade bit consistently improved ROP versus conventional bits used in offset wells within the same pad.
The HyperBlade bit consistently improved ROP versus conventional bits used in offset wells within the same pad.
地点
DJ Basin, 美国, North America, 陆上
Feature.PageContent.LeftRailDetails.Title

Challenge: Improve ROP in vertical, curve, and lateral sections.

Solution: Deploy a HyperBlade hyperbolic diamond element bit.

Results:

  • Achieved an average ROP increase of 20% versus offset wells drilled with bits using conventional cutters.
  • Set field performance record for operator.
相关产品
HyperBlade
Hyperbolic diamond element bit

Increase ROP and maintain steerability in plastic formations with the new hyperbolic element bit.
Helpful links
About SLB
Privacy
Terms of Service
Preferences
Sitemap
Copyright © 2024 SLB. All rights reserved.