Losseal Natural Fracture Treatment Saves Operator USD 260,000 After Total Losses of OBM, Pakistan | SLB

Losseal Natural Fracture Treatment Saves Operator USD 260,000 After Total Losses of OBM, Pakistan

已发表: 05/02/2018

Blue hero texture

Total loss of OBM challenges casing cement job

An operator was drilling the 12 1/2-in section of a new well in Pakistan and reached 3,325 m [10,900 ft] to the top of the Lockhart Formation with a final OBM weight of 2.03 g/cm3 [16.9 lbm/galUS]. As the 9 5/8-in casing was run, the well experienced total losses.

The presence of the casing in the well limited the operator's options to stop the losses. Pumping multiple high-concentration LCM pills would increase the risk of choking the check valves on the casing. In addition, any significant circulation would increase the risk of destabilizing the open hole, which would jeopardize the entire cementing operation.

The use of OBM added to the challenge because circulating multiple LCMs wastes large volumes of expensive mud, and the friction properties of the mud reduce an LCM's ability to create a bridge or additional cake at the formation face. Instead, the operator asked Schlumberger to cure the losses and cement the well in a single operation without mud circulation.

Expert software optimizes OBM-compatible technology

The engineers were prepared for a Losseal Natural Fracture treatment with a composite blend of OBM-compatible fibers and solids that create a strong, impermeable grid, stopping mud or cement from flowing into natural fractured zones. The engineers input well fluid information, loss rates, and other well data into the Lost Circulation Control Advisor software, an expert decision-tree application used to analyze and solve lost circulation problems, to generate a fit-for-purpose treatment design that would cure the losses with a single OBM-compatible pill.

Graph: The job chart shows that as cementing began (A), the mud pit volume was decreasing, indicating the losses. When the Losseal Natural Fracture treatment reached the loss zone (B), the surface pressure increased. As spacer and cement pumping continued (C), the mud pit volume increased, indicating complete returns to surface.
The job chart shows that as cementing began (A), the mud pit volume was decreasing, indicating the losses. When the Losseal Natural Fracture treatment reached the loss zone (B), the surface pressure increased. As spacer and cement pumping continued (C), the mud pit volume increased, indicating complete returns to surface.

Well data were also input into CEMENTICS software to design the spacer train and cement slurry within the limited pressure window. The result was a tight density range from spacer system (2.04 g/cm3 [17.0 lbm/galUS]) to the cement slurry (2.16 g/cm3 [18.0 lbm/galUS]).

Pill cures losses, enabling cementing

The cementing crew delivered the pumping the operation as designed. When the Losseal Natural Fracture treatment reached the loss zone, the surface pressure and mud pit volume began to increase, indicating the pill had cured the losses, restoring returns to surface, including approximately USD 55,000 in OBM.

After the operation, the cement bond log confirmed the top of cement and consistent cement bond across the interval, saving the operator an estimated USD 205,000 by eliminating the need for remedial cementing.

地点
Pakistan, 亚洲, 陆上
Feature.PageContent.LeftRailDetails.Title

Challenge:
Cement 9 5/8-in casing across fractured formation despite total losses of oil-based mud (OBM) that preclude circulation.

Solution:

  • Deliver Losseal Natural Fracture lost circulation control treatment as part of the spacer train.
  • Design cementing operation with CEMENTICS zonal isolation software to optimize density and rheology hierarchy and equivalent circulating density for the narrow pore-to-fracture pressure window.

Results:

  • Cured losses with a single pill of OBM-compatible lost circulation material (LCM), restoring returns to surface and enabling recovery of mud valued at approximately USD 55,000.
  • Cemented the casing with top of cement at designed depth and good cement bond logs across all formations, saving approximately USD 205,000 by eliminating the need for remedial cementing
相关产品
Subscribe