已发表: 01/03/2014
已发表: 01/03/2014
Despite extensive job planning and tension simulations, high, erratic tension occurred during a North Sea perforating intervention on tractored wireline. In addition, reliable correlation could not be achieved in the intervals of interest. CNR International (UK) Limited decided to retrieve the toolstring, but could not use the cable because the 7,720-lbf limit for the SWL had been reached.
The simple, robust TuffTRAC cased hole services tractor brings reverse tractoring to high-angle and horizontal wells along with active traction control to continuously control the radial force applied by the tractor arms. With low sensitivity to wellbore conditions, the TuffTRAC tractor is ideal for any cased hole service, including perforating and intervention operations. Its electromechanical drive system optimizes the consumption of available surface power, achieving more than 45% conversion efficiency from the supplied electrical power to mechanical tractoring force. The resulting lower power requirements do not stress auxiliary systems and the tractor does not have to be stopped to cool down, even during long, continuous deployments.
Because the TuffTRAC cased hole services tractor incorporates reverse tractoring capability, it did not have to be reconfigured to reverse tractor the perforating string from the well. The tractor directly applied overpull to the gun string to avoid the safety and operational risks of exceeding the SWL of the cable. A total of 3,850 ft of reverse tractoring to successfully retrieve the perforating toolstring was performed over three runs because of the adverse well conditions.
Challenge: Conduct selective perforating intervention on wireline—which turned into a recovery operation when the safe working load (SWL) limit of the cable was reached before accurate correlation could be achieved
Solution: Convey the perforating toolstring on the TuffTRAC cased hole services tractor with reverse tractoring and active traction control for efficient maneuverability deploying and retrieving in the high-angle well
Results: Avoided a fishing operation by using the TuffTRAC tractor’s bidirectional capability to reverse tractor 3,850 ft for retrieval of the perforating toolstring
