已发表: 11/18/2021
已发表: 11/18/2021
The operator wanted a fluid design capable of responding to different problems in the Magdalena Basin. The challenge was to maintain the lowest possible rheology in the drilling fluid, ensuring the suspension of cuttings and weight material.
Offset wells in the area presented NPT associated with hole conditions and stuck pipe situations. High contents of smectite and kaolinite and shale packages generated instability issues. High-pressure zones required preventive measures and proper ECD to maintain well control. High ECD during cementing caused loss of cement to the formation.
RheGuard system is a 100% oil-based system that contains MicroBar micronized weighting additive. With particle sizes less than 5 um, MicroBar additive maintains the low rheological values needed to maintain proper ECD management while drilling high-pressure zones and encountering weak zones in highly complex geological settings. An oil/water ratio of 1 to 1 eliminates fluid salinity issues.
The mud formulation maintained chemical stability, improving BHA trips and casing running performance. A formulation using 50% MicroBar additive as a weighting material maintained adequate management of the ECD in drilling and cementing. The formulation reached a yield point up to 13 lbf/100 ft2 and a sag shoe test of less than 0.3 lbm/galUS. Reducing the rheological profile of the OBM helped to improve ECD management during the cementing job. The improvements resulted in a rig time savings of 13.5 days and a cost savings of USD 2.5 million.
