已发表: 11/27/2012
已发表: 11/27/2012
Within the first 90 days, Clayton Williams measured substantially higher production compared with other horizontal wells in the field. The engineered completion workflow has helped the customer with significant deduction in completion costs and increased time savings. Upon observing the benefits of the engineered completion design, the operator requested the combination of ThruBit services and Mangrove stimulation design for twelve additional wells.
Well A used geometric perforation spacing, while Wells B and C used engineered designs. For consistency, all three wells were
Schlumberger conveyed RST reservoir saturation tool and Sonic Scanner acoustic scanning tool on wireline to help determine lithology and stresses along the laterals. Mangrove software allowed engineers to analyze the data and develop optimized completion strategies for wells B and C in under an hour. The three wells were stimulated simultaneously using the “zipper-frac” approach, which alternated stages between wells. While one well was being fractured, a second team performed plug-and-perf operations on the next well.
StimMAP LIVE real-time microseismic monitoring service showed that approximately 35% of the perforation clusters in the lateral portion of Well A had little to no microseismic activity. In contrast, only 20% of the perforation clusters in Wells B and C had little to no microseismic events. On a per-foot basis, Well B, which was approximately the same distance from the monitor well as Well A, had 25% more stimulated volume. Initial gas flowback rates of Wells B and C were respectively 33% and 40% higher than the rate of well A on a 5⁄8-in choke. In addition, Seneca Resources realized lower treating pressures at higher pump rates, leading to lower operational risk. As a result, Seneca Resources has continued to use microseismic data to evaluate treatments and has obtained lateral measurements in additional wells to engineer completion designs with Mangrove software.
Challenge: Improve hydraulic fracture coverage—and production rates—from heterogeneous horizontal wells where stimulation treatments tend to flow to lowest-stressed zones.
Solution: Use cased hole Sonic Scanner and RST reservoir saturation tool measurements tractored into the lateral, along with Mangrove reservoir-centric stimulation design software to engineer perforation locations and help distribute stimulation treatments more evenly.
Results: Realized 25% more stimulated volume and 35% higher initial gas flow rates than in offset well with geometric perforation cluster placements.
