StingBlade Bit Helps Drill 12 1/4-in Section Shoe to Shoe in One Run, a First in the Rumaila Field, Iraq | SLB

StingBlade Bit Helps Drill 12 1/4-in Section Shoe to Shoe in One Run, a First in the Rumaila Field, Iraq

已发表: 03/07/2016

Concrete blue texture
The StingBlade bit in the integrated BHA successfully drilled the 1,435-m 121/4-in interval shoe to shoe in a single run at an ROP of 9.3 m/h [30.5 ft/h], 64% faster compared with the offset wells’ average in the field. After completing the interval, the StingBlade bit was pulled out of hole with a good dull condition. The system built angle from 0° to 12.5° inclination with 3°/30-m [3°/100-ft] dogleg severity, and ROO saved 3.74 days of on-bottom drilling time compared with offset wells.
The StingBlade bit in the integrated BHA successfully drilled the 1,435-m 121/4-in interval shoe to shoe in a single run at an ROP of 9.3 m/h [30.5 ft/h], 64% faster compared with the offset wells’ average in the field. After completing the interval, the StingBlade bit was pulled out of hole with a good dull condition. The system built angle from 0° to 12.5° inclination with 3°/30-m [3°/100-ft] dogleg severity, and ROO saved 3.74 days of on-bottom drilling time compared with offset wells.
地点
Iraq, 亚洲, 陆上
Feature.PageContent.LeftRailDetails.Title

Rumaila Field
Southeastern Iraq

Application
Directional drilling

Section
12 1/4 in

Interval length
4,706 ft [1,435 m]

Lithology
Hard interbedded carbonates

背景

Rumaila Operating Organization (ROO) planned a directional well across the Rus and Hartha Formations in Iraq. These highly interbedded and hard carbonate formations historically induce severe vibrations, causing bit damage and requiring from two to five bits to drill the 12 1/4-in section.

Subscribe