DYNATORQUE 360

Multiturn worm-gear operator

DYNATORQUE 360 multiturn worm-gear operator is commercial grade, worm-geared, and made for applications that require multiple output turns but not withstanding thrust loading.

These worm-gear operators lack positive output stops but have bores, keyways, and mounting dimensions as listed on the individual operator envelope drawings. Operators are assembled in position II (clockwise input results in clockwise output), and have one shop coat of black oxide primer. Handwheels are sold separately.

These operators are available with various mounting interface dimensions. Custom-machined gears come with bores and bolt holes for direct mounting to the valve.

Standard materials are cast gray or ductile iron, but we also offer a varied selection of alternate materials to meet your application requirements.

DYNATORQUE Multi-Turn Worm-Gear Operators (360 Deg)

Specifications

Model	Unit Weight, lbm	Max. Output Torque, lbf.in	Gear Ratio	Turns for 360°	Std. Output Bore, in	Std. Key Size, in × in	Std. Mounting Pattern (Qty. and Size)	Std. Mounting Pattern (Bolt Circle)	Mech. Adv.	Handwheel Size, in	Approx. Rim Pull, lbf
DT3	7	4,500	30:1	30	1.000	0.250	(4)3/8-16	3.250	8.10	14	80
DT8	19	8,000	30:1	30	1.750	0.375	(4)1/2-13	5.000	8.10	24	82
DT12	26	16,000	57:1	57	2.000	0.375	(4)1/2-13	4.921	13.68	30	78
DT21	34	26,000	60:1	60	2.500	0.500	(4)5/8-11	5.512	22.50	30	77
DT36	78	36,000	53:1	53	3.250	0.750	(4)3/4-10	6.496	19.00	36	105
DT50^†	105	50,000	212:1	212	3.250	0.750	(4)3/4-10	6.496	60.80	20	80
DT54^†	108	63,000	318:1	318	3.250	0.750	(4)3/4-10	6.496	91.20	18	77

^† Indicates units with spur assist.

Notes

Handwheels listed are recommended sizes to produce full rated torque with the rim effort listed.
Bore, keyways, and mounting patterns listed are for Cameron standards.
Standard mounting patterns on the DT3 through the DT54 are (4) tapped holes straddling centerline at 45°.