视频 Declutchable Manual Overrides
Used with pneumatic, hydraulic, and backdrivable electric actuators.
DYNATORQUE SD
Declutchable manual overrides
Our DYNATORQUE SD declutchable manual overrides are used with pneumatic, hydraulic and backdrivable electric actuators. These products are sandwich mounted as part of an automated valve package to provide manual operation of the automated valve if a loss of plant air supply, power gas, hydraulic fluid power, or electricity occurs.
- Standard ISO 5211 mounting dimensions on top and bottom flanges or custom machined for mounting to actuator and valve
- Transparent to valve operation when disengaged
- Suitable for either double acting or spring return actuators
- Nine frame and spur combinations that provide output torque from 3,000 to 140,000 lbf.in [340 to 15,815 N.m]
- One-handed declutch mechanism
- Declutchable override sandwich mounted between valve and actuator
- Units are suitable for use in all handwheel applications with chainwheel adapters.
The declutch mechanism is designed to mount between the valve and its primary driving mechanism. The declutch locks in both the engaged and disengaged positions.
We offer a locking device for DYNATORQUE SD manual overrides to prevent engagement or disengagement
DYNATORQUE SD
Declutchable manual override
| MODEL | Double-Acting Actuators Maximum Valve Torque, lbf.in [N.m] |
Spring-Return Actuators Spring-End Torque, lbf.in [N.m] |
Override Maximum Torque Rating, lbf.in [N.m] | Mech. Adv. | Handwheel Size, in |
Rim Pull, lbf |
Hsg. Btm. Mounting Pattern (Min. BCD/Tap) |
Hsg. Btm. Mounting Pattern (Std. BCD/Tap) |
Hsg. Btm. Mounting Pattern (Max. BCD/Tap) |
Cov. Mounting Pattern (Min. BCD/Tap) |
Cov. Mounting Pattern (Std. BCD/Tap) |
Cov. Mounting Pattern (Std. BCD/Tap) |
Total Weight, lbm |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DT3SD | 2400 [271] | 1100 [124] | 3000 [339] | 8.10 | 10 | 74 | 1.968-1/4-20 |
2.756-(4)5/16-18 |
4.016-3/8-16 |
2.756-.344 |
2.756-(4).344 |
4.250-.406 |
20 |
| DT7SD | 5600 [633] | 2600 [294] | 7000 [791] | 12.96 | 14 | 77 | 3.250-3/8-16 |
4.016-(4)3/8-16 |
5.000-1/2-13 |
3.750-.438 |
4.016-(4).406 |
5.000-.562 |
28 |
| DT12SD | 9600 [1085] | 4550 [503] | 12,000 [1356] | 13.68 | 24 | 73 | 3.750-3/8-16 |
4.921-(4)1/2-13 |
6.496-3/4-10 |
4.750-.562 |
4.921-(4).562 |
6.496-.812 |
45 |
| DT21SD | 16,800 [1898] | 7775 [879] | 21,000 [2373] | 13.20 | 30 | 106 | 4.500-5/8-11 |
5.512-(4)5/8-11 |
7.000-3/4-10 |
5.500-.562 |
5.512-(4).688 |
7.750-.812 |
62 |
| DT36SD | 28,800 [3254] | 13,330 [1506] | 36,000 [4067] | 13.25 | 36 | 151 | 6.000-1/2-13 |
6.496-(4)3/4-10 |
10.250-3/4-10 |
6.000-.563 |
6.496-(4).812 |
10.000-.688 |
130 |
| DT40SD | 32,000 [3616] | 14,815 [1674] | 40,000 [4519] | 19.84 | 36 | 112 | 6.000-1/2-13 |
6.496-(4)3/4-10 |
10.250-3/4-10 |
6.000-.563 |
6.496-(4).812 |
10.000-.688 |
130 |
| DT50SD | 40,000 [4520] | 18,520 [2093] | 50,000 [5649] | 34.45 | 36 | 81 | 6.000-1/2-13 |
6.496-(4)3/4-10 |
10.250-3/4-10 |
6.000-.563 |
6.496-(4).812 |
10.000-.688 |
168 |
| DT54SD | 50,400 [5695] | 23,330 [2636] | 63,000 [7118] | 51.68 | 30 | 81 | 6.000-1/2-13 |
6.496-(4)3/4-10 |
10.250-3/4-10 |
6.000-.563 |
6.496-(4).812 |
10.000-.688 |
163 |
| DT90SD | 72,000 [8136] | 33,325 [3766] | 90,000 [10,169] | 49.92 | 36 | 100 | 6.500-3/4-10 |
10.000-(8)5/8-11 |
11.750-3/4-10 |
8.500-.688 |
10.000-(8).688 |
10.750-.812 |
268 |
| DT140SD | 112,000 [12,655] | 51,850 [5859] | 140,000 [15,818] | 78.00 | 36 | 100 | 6.500-3/4-10 |
10.000-(8)5/8-11 |
11.750-3/4-10 | 8.500-.688 |
10.000-(8).688 |
10.750-.812 |
271 |
Notes
- Handwheel and rim efforts shown are calculated at unit maximum torque rating.
- DT50SD and DT90SD have a 4:1 spur assist; DT54SD and DT140SD have a 6:1 spur assist.
- Handwheels listed are recommended sizes to produce full rated torque with rim effort listed.
- Standard mounting patterns on all units are per ISO 5211 (UNC) specifications.
Helpful links
About SLB